MENU

CN  |  JA

2019 Copyright Paiyun Furniture Jiangsu Co., Ltd. 
苏ICP备19000420号 Powered by www.300.cn

How to maintain the table with different materials?

2019/01/02
In daily life, housewives often clean and maintain furniture to keep them shiny. But you may not know that some wrong cleaning and maintenance methods, although temporarily making the furniture clean, actually cause potential damage to the furniture. As the use time increases, your furniture will become irreparable. .
 
●The rag is clean
When cleaning and maintaining furniture, be sure to make sure the rags used are clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt rubbing repeatedly on the furniture surface, but will damage the bright surface of the furniture.
 
●Select the right care agent
In order to maintain the original brightness of the furniture, there are currently two kinds of furniture care products: furniture care spray wax and cleaning maintenance agent. The former is mainly for furniture made of wood, polyester, paint, fireproof rubber sheet, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of furniture such as wood, glass, synthetic wood or melamine board, especially suitable for mixed materials. Therefore, if you can use skin care products that have both cleansing and care effects, you can save a lot of valuable time.
 
Before using the wax and cleaning and maintenance agent, it is best to shake it first, then hold the spray can directly at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray the dry rag at a distance of about 15 cm, so that you can wipe the furniture again, which can be very good for cleaning and maintenance.
 
In addition, after using the rag, remember to wash and dry. As for furniture with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.